Snowmobile World banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Hey all.

I have an '02 500 XC SP. I just realized the torsion bar on the right side is snapped off. I was wondering if it is one solid peice that goes through the machine from left to right. I am looking at alternatives fofr the replacement of the bar too. What other years and series will also fit this 500. I have a torn down 440 fan and the bar looks similar to the one that I need. The next question will be, how hard is it to take off and reinstall in my 500?
 

·
Registered
Joined
·
2,032 Posts
yes its one solid piece. just drill the rivets out of the triangular mounting plate. you dont need to pull the trailing arms. move the trianglular plate down the bar and work it out of one side and then the other. many of the swaybars are the same. just lay the old on top of the new. if its bent the same your good to go.
 

·
Registered
Joined
·
593 Posts
Some may also be different diameters, for a stiffer or less stiff sway bar.
 
1 - 3 of 3 Posts
Top