Snowmobile World banner

1 - 3 of 3 Posts

·
Registered
Joined
·
47 Posts
Discussion Starter #1
When tuning ufo's should you drill out the disc to 5/16" and drill out the needle jet
or just do one or the other. I thought I heard somewhere that you should leave the disc
and just drill out the needle jet with a # 55 drill. What size is a #55 in inches?
 

·
Registered
Joined
·
21 Posts
A #55 drill is .052 ". I drilled my out to the largest that they recommended.
I didn't really find that it made much difference. I am sure it did but mine was very rich at Idle. I reduced my pilot jets by about 7-8 sizes from what was stock. I installed the UFO in a 97 mxz 670. Good luck
 
1 - 3 of 3 Posts
Top