has anyone tryed the v-force reeds in the 800 xcr. if so how much improvement did you get for the $$$$ and did you need any changes to clutching and jetting. i am concidering it but have no experience with this line of product. i know there were some serious recalls in the past and that concerns me. any information wood be greatlly appreciated.
V - force reeds ?
1 - 4 of 4 Posts
Joined
·
348 Posts
I have a Delta VF2 reeds and billet heads on my '99 XCR800 (thats the way it came with, when I bought the sled last Novemeber) When I first got the sled, after first few runs - I changes few things in the clutching. It runs great running at 8.3k revs. WL.
Joined
·
2,560 Posts
Ran them on my 99 XCR8, think they were probably a waste of money for my use. Normally just trails, long distance cruising. Never noticed a difference in milage or top end on otherwise stock machine.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
1987? Polaris Indy Trail
POLARISI am looking at what I think is a 1987 Polaris Indy Trail, could someone please help me verify what sled this is. Model 0870761 Serial 1421358 Build Date 0901986 I would like to know what engine this has as well. It is 2 cylinder- 8
- 7K
-
2004 Polaris Frontier Touring Track Studding Question
POLARISHello All, I have a 2004 Polaris Frontier touring 4 stroke liquid cooled sled with the 136" x 15" x 1" track with the 2.52 pitch track that I use purely for ice fishing. Can I stud this track without damaging the tunnel or rear heat exchanger? I purchased 108 Fast Trac 1.175" triple X series...- 0
- 119
-
2005 Classic 500 Tach
POLARISMy 05 Classic 500 does not have a tach. Can someone assist to tell me what pulse tach I need and will it just plug and play- 0
- 113
-
2014 Iq lxt turbo
POLARISWhile doing Polaris oil change there was a burning smell during the key cycling stage. After oil change there is still smoke under the hood coming up during idle.- 0
- 142
-
1995 Polaris Indy 500EFI bogging down after warmup
POLARIS95 polaris 500 efi - bogs down after warm up. I see others with similar problem. Machine runs fine for 20 min. Then it begins to bog down. Shut it off for 10 sec, something in ECU resets and it runs fine for 10 min, then begins bogging down again. Shut it off for 10 sec, runs fine for 10 min ...- 1
- 249
Join now to ask and comment!