Snowmobile World banner

1 - 4 of 4 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I have a water temp light that keeps comming on , it will come on right after I start the engine on a 5 degree day , it flickers off and on some when riding but mostly on . I replaced the sencor and still getting the same thing. does it hot or cold. Yes machine is full of antifreeze / water. I have checked my grounds too... any Ideas ??

Triple touring 600 cc 2000
 

·
Senior Member
Joined
·
10,054 Posts
I would be looking at either a wire connection that may have moisture in it sending a faulty signal or your actual gauge,,,, mine on the firecat used to show a dim light on all my dummy lights,,,, now when one actually went off, it would light up all the way. I switched the speedo out with all the dummy lights on it and it took care of the problem,,,, yours could be the same, but I would look into connectors first as its a lot cheaper to find and fix than a new speedo,,,
 

·
Registered
Joined
·
448 Posts
Bleed the system for air bubbles.

Not sure if that sled has a thermostat, but check for that.

Recheck the wires. - You never know...
 
1 - 4 of 4 Posts
Top