Snowmobile World banner

1 - 12 of 12 Posts

·
Registered
Joined
·
374 Posts
Discussion Starter #1
Just to help kick off the Big Bore section. I'll post my setup.

BMP stock pipe mod.
0-2000' BMP 91 oct, head mod.
Sno-tech torque link
26/40 gearing
EPI yellow primary spring
78 gram Dalton weights (old D&D style)
62/54 speedwerx helix
speedwerx blue secondary run in the 4th hole.
020 cat belt
1 1/4 RIPSAW track!!
shimmed exhaust vlave mod
#58 needle e-clip in #4
450/460 mains
2000 ZR Snopro front springs
 

·
Registered
Joined
·
1,695 Posts
Here is my setup:
02 MXZ 800
Stock pipe, PPP can
RKT head-modified 13.5 to 1
shimmed raves
full port and polish with extra intake ports
Holtzman Tempa-Flow
CPI hooded needle jet mod
digatron DS-52 EGT's
24/44 gearing and 9 tooth extroverts
293X ramps, clicker 2, 230/410 primary and 24 grams of pin
Team TS98 secondary 56-.46-46 rer helix, black spring
Doo 127 belt
tunnel stretched to 136
15x136x1.25 ripsaw with 108 1.325 Woody's and Accord tall nuts
01 440X straight bars with idooski's 5" risers
 

·
Registered
Joined
·
1,695 Posts
It runs pretty good. Last year I had the Race Shop twins on it and had a problem with getting heat into the pipe at the right time. When it was on..IT WAS ON, but now that I have streached it, I wanted a little more consistancy in power.
I havent had a chance to ride any this year other than a blast across a snowless hay field. The sled went right to 8000 and then pulled on up to 8400. I clicked down to 2 to take care of the over rev. Sled works its best at 8200 rpm.
We will be heading up to the UP next weekend for the charity ride. Cant wait to get to ride it with this combo!!
 

·
Registered
Joined
·
6 Posts
04 zr 900
Flannery porting
2 degree key
DD twin pipes
174 hp on the dyno simple and quick and no other crap like heads,shims,muffler bearings or any put this on because they say it's fast crap.
 

·
Registered
Joined
·
184 Posts
Just to help kick off the Big Bore section. I'll post my setup.

BMP stock pipe mod.[/b]
What is this pipe mod?
 

·
Registered
Joined
·
374 Posts
Discussion Starter #11
only 10 months late..... :tounge:

BMP pipe mod... they shorted the tail pipe and work the y pipe. Its a good mod to do. I sold my 900 last fall and only have the wifes f5 this year. I was going to buy a new F1000 but the mini van took a dump on us when we were heading to the Vikings/Texans game a few months ago. :devil:
 

·
Registered
Joined
·
185 Posts
My Kitty,

04 King Cat 900 Titanium
Tunnel shorted to 136"
136"x2"
Track ported
3" bar risers
vohk milled head
enlarged intake
advance timming key
black magic pipe
black magic tuned can
05 exhaust dump conversion
cutler custom ground weights
custom heilix
dropped a tooth in gearing



pic dont show Ex conv
 
1 - 12 of 12 Posts
Top